2.5.2. Global Configuration

The keys in this section affect the operations of the buildmaster globally.

2.5.2.1. Database Specification

Buildbot requires a connection to a database to maintain certain state information, such as tracking pending build requests. In the default configuration Buildbot uses a file-based SQLite database, stored in the state.sqlite file of the master’s base directory.

Important

SQLite3 is perfectly suitable for small setups with a few users. However, it does not scale well with large numbers of builders, workers and users. If you expect your Buildbot to grow over time, it is strongly advised to use a real database server (e.g., MySQL or Postgres).

A SQLite3 database may be migrated to a real database server using buildbot copy-db script.

See the Using A Database Server section for more details.

Override this configuration with the db_url parameter.

Buildbot accepts a database configuration in a dictionary named db. All keys are optional:

c['db'] = {
    'db_url' : 'sqlite:///state.sqlite',
}

The db_url key indicates the database engine to use. The format of this parameter is completely documented at http://www.sqlalchemy.org/docs/dialects/, but is generally of the form:

"driver://[username:password@]host:port/database[?args]"

This parameter can be specified directly in the configuration dictionary, as c['db_url'], although this method is deprecated.

The following sections give additional information for particular database backends:

SQLite

For sqlite databases, since there is no host and port, relative paths are specified with sqlite:/// and absolute paths with sqlite:////. For example:

c['db_url'] = "sqlite:///state.sqlite"

SQLite requires no special configuration.

MySQL

c['db_url'] = "mysql://username:password@example.com/database_name?max_idle=300"

The max_idle argument for MySQL connections is unique to Buildbot and should be set to something less than the wait_timeout configured for your server. This controls the SQLAlchemy pool_recycle parameter, which defaults to no timeout. Setting this parameter ensures that connections are closed and re-opened after the configured amount of idle time. If you see errors such as _mysql_exceptions.OperationalError: (2006, 'MySQL server has gone away'), this means your max_idle setting is probably too high. show global variables like 'wait_timeout'; will show what the currently configured wait_timeout is on your MySQL server.

Buildbot requires use_unique=True and charset=utf8, and will add them automatically, so they do not need to be specified in db_url.

MySQL defaults to the MyISAM storage engine, but this can be overridden with the storage_engine URL argument.

Postgres

c['db_url'] = "postgresql://username:password@hostname/dbname"

PosgreSQL requires no special configuration.

2.5.2.2. MQ Specification

Buildbot uses a message-queueing system to handle communication within the master. Messages are used to indicate events within the master, and components that are interested in those events arrange to receive them.

The message queueing implementation is configured as a dictionary in the mq option. The type key describes the type of MQ implementation to be used. Note that the implementation type cannot be changed in a reconfig.

The available implementation types are described in the following sections.

Simple

c['mq'] = {
    'type' : 'simple',
    'debug' : False,
}

This is the default MQ implementation. Similar to SQLite, it has no additional software dependencies, but does not support multi-master mode.

Note that this implementation also does not support message persistence across a restart of the master. For example, if a change is received, but the master shuts down before the schedulers can create build requests for it, then those schedulers will not be notified of the change when the master starts again.

The debug key, which defaults to False, can be used to enable logging of every message produced on this master.

Wamp

Note

At the moment, wamp is the only message queue implementation for multimaster. It has been privileged as this is the only message queue that has very solid support for Twisted. Other more common message queue systems like RabbitMQ (using the AMQP protocol) do not have a convincing driver for twisted, and this would require to run on threads, which will add an important performance overhead.

c['mq'] = {
    'type' : 'wamp',
    'router_url': 'ws://localhost:8080/ws',
    'realm': 'realm1',
    # valid are: none, critical, error, warn, info, debug, trace
    'wamp_debug_level' : 'error'
}

This is a MQ implementation using the wamp protocol. This implementation uses Python Autobahn wamp client library, and is fully asynchronous (no use of threads). To use this implementation, you need a wamp router like Crossbar.

The implementation does not yet support wamp authentication. This MQ allows buildbot to run in multi-master mode.

Note that this implementation also does not support message persistence across a restart of the master. For example, if a change is received, but the master shuts down before the schedulers can create build requests for it, then those schedulers will not be notified of the change when the master starts again.

router_url (mandatory): points to your router websocket url.

Buildbot is only supporting wamp over websocket, which is a sub-protocol of http. SSL is supported using wss:// instead of ws://.

realm (optional, defaults to buildbot): defines the wamp realm to use for your buildbot messages.

wamp_debug_level (optional, defaults to error): defines the log level of autobahn.

You must use a router with very reliable connection to the master. If for some reason, the wamp connection is lost, then the master will stop, and should be restarted via a process manager.

Crossbar

The default Crossbar setup will just work with Buildbot, provided you use the example mq configuration below, and start Crossbar with:

# of course, you should work in a virtualenv...
pip install crossbar
crossbar init
crossbar start

.crossbar/config.json:

{
    "version": 2,
    "controller": {},
    "workers": [
        {
            "type": "router",
            "realms": [
                {
                    "name": "test_realm",
                    "roles": [
                        {
                            "name": "anonymous",
                            "permissions": [
                                {
                                    "uri": "",
                                    "match": "prefix",
                                    "allow": {
                                        "call": true,
                                        "register": true,
                                        "publish": true,
                                        "subscribe": true
                                    },
                                    "disclose": {
                                        "caller": false,
                                        "publisher": false
                                    },
                                    "cache": true
                                }
                            ]
                        }
                    ]
                }
            ],
            "transports": [
                {
                    "type": "web",
                    "endpoint": {
                        "type": "tcp",
                        "port": 1245
                    },
                    "paths": {
                        "ws": {
                            "type": "websocket"
                        }
                    }
                }
            ]
        }
    ]
}

Buildbot can be configured to use Crossbar by the following:

c["mq"] = {
    "type" : "wamp",
    "router_url": "ws://localhost:1245/ws",
    "realm": "test_realm",
    "wamp_debug_level" : "warn"
}

Please refer to Crossbar documentation for more details.

2.5.2.3. Multi-master mode

See Multimaster for details on the multi-master mode in Buildbot Nine.

By default, Buildbot makes coherency checks that prevent typos in your master.cfg. It makes sure schedulers are not referencing unknown builders, and enforces there is at least one builder.

In the case of an asymmetric multimaster, those coherency checks can be harmful and prevent you to implement what you want. For example, you might want to have one master dedicated to the UI, so that a big load generated by builds will not impact page load times.

To enable multi-master mode in this configuration, you will need to set the multiMaster option so that buildbot doesn’t warn about missing schedulers or builders.

# Enable multiMaster mode; disables warnings about unknown builders and
# schedulers
c['multiMaster'] = True
c['db'] = {
    'db_url' : 'mysql://...',
}
c['mq'] = {  # Need to enable multimaster aware mq. Wamp is the only option for now.
    'type' : 'wamp',
    'router_url': 'ws://localhost:8080',
    'realm': 'realm1',
    # valid are: none, critical, error, warn, info, debug, trace
    'wamp_debug_level' : 'error'
}

2.5.2.4. Site Definitions

Three basic settings describe the buildmaster in status reports:

c['title'] = "Buildbot"
c['titleURL'] = "http://buildbot.sourceforge.net/"

title is a short string that will appear at the top of this buildbot installation’s home page (linked to the titleURL).

titleURL is a URL string that must end with a slash (/). HTML status displays will show title as a link to titleURL. This URL is often used to provide a link from buildbot HTML pages to your project’s home page.

The buildbotURL string should point to the location where the buildbot’s internal web server is visible. This URL must end with a slash (/).

When status notices are sent to users (e.g., by email or over IRC), buildbotURL will be used to create a URL to the specific build or problem that they are being notified about.

2.5.2.5. Log Handling

c['logCompressionMethod'] = 'gz'
c['logMaxSize'] = 1024*1024 # 1M
c['logMaxTailSize'] = 32768
c['logEncoding'] = 'utf-8'

The logCompressionLimit enables compression of build logs on disk for logs that are bigger than the given size, or disables that completely if set to False. The default value is 4096, which should be a reasonable default on most file systems. This setting has no impact on status plugins, and merely affects the required disk space on the master for build logs.

The logCompressionMethod controls what type of compression is used for build logs. The default is ‘gz’, and the other valid option are ‘raw’ (no compression), ‘gz’ or ‘lz4’ (required lz4 package).

Please find below some stats extracted from 50x “trial Pyflakes” runs (results may differ according to log type).

Space saving details

compression

raw log size

compressed log size

space saving

compression speed

bz2

2.981 MB

0.603 MB

79.77%

3.433 MB/s

gz

2.981 MB

0.568 MB

80.95%

6.604 MB/s

lz4

2.981 MB

0.844 MB

71.68%

77.668 MB/s

The logMaxSize parameter sets an upper limit (in bytes) to how large logs from an individual build step can be. The default value is None, meaning no upper limit to the log size. Any output exceeding logMaxSize will be truncated, and a message to this effect will be added to the log’s HEADER channel.

If logMaxSize is set, and the output from a step exceeds the maximum, the logMaxTailSize parameter controls how much of the end of the build log will be kept. The effect of setting this parameter is that the log will contain the first logMaxSize bytes and the last logMaxTailSize bytes of output. Don’t set this value too high, as the tail of the log is kept in memory.

The logEncoding parameter specifies the character encoding to use to decode bytestrings provided as logs. It defaults to utf-8, which should work in most cases, but can be overridden if necessary. In extreme cases, a callable can be specified for this parameter. It will be called with byte strings, and should return the corresponding Unicode string.

This setting can be overridden for a single build step with the logEncoding step parameter. It can also be overridden for a single log file by passing the logEncoding parameter to addLog.

2.5.2.6. Data Lifetime

Horizons

Previously Buildbot implemented a global configuration for horizons. Now it is implemented as a utility Builder, and shall be configured via the JanitorConfigurator.

Caches

c['caches'] = {
    'Changes' : 100,     # formerly c['changeCacheSize']
    'Builds' : 500,      # formerly c['buildCacheSize']
    'chdicts' : 100,
    'BuildRequests' : 10,
    'SourceStamps' : 20,
    'ssdicts' : 20,
    'objectids' : 10,
    'usdicts' : 100,
}

The caches configuration key contains the configuration for Buildbot’s in-memory caches. These caches keep frequently-used objects in memory to avoid unnecessary trips to the database. Caches are divided by object type, and each has a configurable maximum size.

The default size for each cache is 1, except where noted below. A value of 1 allows Buildbot to make a number of optimizations without consuming much memory. Larger, busier installations will likely want to increase these values.

The available caches are:

Changes

the number of change objects to cache in memory. This should be larger than the number of changes that typically arrive in the span of a few minutes, otherwise your schedulers will be reloading changes from the database every time they run. For distributed version control systems, like Git or Hg, several thousand changes may arrive at once, so setting this parameter to something like 10000 isn’t unreasonable.

This parameter is the same as the deprecated global parameter changeCacheSize. Its default value is 10.

Builds

The buildCacheSize parameter gives the number of builds for each builder which are cached in memory. This number should be larger than the number of builds required for commonly-used status displays (the waterfall or grid views), so that those displays do not miss the cache on a refresh.

This parameter is the same as the deprecated global parameter buildCacheSize. Its default value is 15.

chdicts

The number of rows from the changes table to cache in memory. This value should be similar to the value for Changes.

BuildRequests

The number of BuildRequest objects kept in memory. This number should be higher than the typical number of outstanding build requests. If the master ordinarily finds jobs for BuildRequests immediately, you may set a lower value.

SourceStamps

the number of SourceStamp objects kept in memory. This number should generally be similar to the number BuildRequesets.

ssdicts

The number of rows from the sourcestamps table to cache in memory. This value should be similar to the value for SourceStamps.

objectids

The number of object IDs - a means to correlate an object in the Buildbot configuration with an identity in the database–to cache. In this version, object IDs are not looked up often during runtime, so a relatively low value such as 10 is fine.

usdicts

The number of rows from the users table to cache in memory. Note that for a given user there will be a row for each attribute that user has.

c[‘buildCacheSize’] = 15

2.5.2.7. Merging Build Requests

c['collapseRequests'] = True

This is a global default value for builders’ collapseRequests parameter, and controls the merging of build requests.

This parameter can be overridden on a per-builder basis. See Collapsing Build Requests for the allowed values for this parameter.

2.5.2.8. Prioritizing Builders

def prioritizeBuilders(buildmaster, builders):
    ...
c['prioritizeBuilders'] = prioritizeBuilders

By default, buildbot will attempt to start builds on builders in order, beginning with the builder with the oldest pending request. Customize this behavior with the prioritizeBuilders configuration key, which takes a callable. See Builder Priority Functions for details on this callable.

This parameter controls the order that the buildmaster can start builds, and is useful in situations where there is resource contention between builders, e.g., for a test database. It does not affect the order in which a builder processes the build requests in its queue. For that purpose, see Prioritizing Builds.

2.5.2.9. Prioritizing Workers

By default Buildbot will select worker for a build randomly from available workers. This can be adjusted by select_next_worker function in global master configuration and additionally by nextWorker per-builder configuration parameter. These two functions work exactly the same:

The function is passed three arguments, the Builder object which is assigning a new job, a list of WorkerForBuilder objects and the BuildRequest.

The function should return one of the WorkerForBuilder objects, or None if none of the available workers should be used. The function can optionally return a Deferred, which should fire with the same results.

def select_next_worker(builder, workers, buildrequest):
    ...
c["select_next_worker"] = select_next_worker

2.5.2.10. Setting the PB Port for Workers

c['protocols'] = {"pb": {"port": 10000}}

The buildmaster will listen on a TCP port of your choosing for connections from workers. It can also use this port for connections from remote Change Sources, status clients, and debug tools. This port should be visible to the outside world, and you’ll need to tell your worker admins about your choice.

It does not matter which port you pick, as long it is externally visible; however, you should probably use something larger than 1024, since most operating systems don’t allow non-root processes to bind to low-numbered ports. If your buildmaster is behind a firewall or a NAT box of some sort, you may have to configure your firewall to permit inbound connections to this port.

c['protocols']['pb']['port'] can also be used as a connection string, as defined in the ConnectionStrings guide.

This means that you can have the buildmaster listen on a localhost-only port by doing:

c['protocols'] = {"pb": {"port": "tcp:10000:interface=127.0.0.1"}}

This might be useful if you only run workers on the same machine, and they are all configured to contact the buildmaster at localhost:10000.

connection strings can also be used to configure workers connecting over TLS. The syntax is then

c['protocols'] = {"pb": {"port":
                         "ssl:9989:privateKey=master.key:certKey=master.crt"}}

Please note that IPv6 addresses with : must be escaped with as well as : in paths and in paths. Read more about the connection strings format in ConnectionStrings documentation.

See also Worker TLS Configuration

2.5.2.11. Defining Global Properties

The properties configuration key defines a dictionary of properties that will be available to all builds started by the buildmaster:

c['properties'] = {
    'Widget-version' : '1.2',
    'release-stage' : 'alpha'
}

2.5.2.12. Manhole

Manhole is an interactive Python shell which allows full access to the Buildbot master instance. It is probably only useful for buildbot developers.

See documentation on Manhole implementations for available authentication and connection methods.

The manhole configuration key accepts a single instance of a Manhole class. For example:

from buildbot import manhole
c['manhole'] = manhole.PasswordManhole("tcp:1234:interface=127.0.0.1",
                                       "admin", "passwd",
                                       ssh_hostkey_dir="data/ssh_host_keys")

2.5.2.13. Metrics Options

c['metrics'] = {
    "log_interval": 10,
    "periodic_interval": 10
}

metrics can be a dictionary that configures various aspects of the metrics subsystem. If metrics is None, then metrics collection, logging and reporting will be disabled.

log_interval determines how often metrics should be logged to twistd.log. It defaults to 60s. If set to 0 or None, then logging of metrics will be disabled. This value can be changed via a reconfig.

periodic_interval determines how often various non-event based metrics are collected, such as memory usage, uncollectable garbage, reactor delay. This defaults to 10s. If set to 0 or None, then periodic collection of this data is disabled. This value can also be changed via a reconfig.

Read more about metrics in the Metrics section in the developer documentation.

2.5.2.14. Statistics Service

The Statistics Service (stats service for short) supports the collection of arbitrary data from within a running Buildbot instance and the export to a number of storage backends. Currently, only InfluxDB is supported as a storage backend. Also, InfluxDB (or any other storage backend) is not a mandatory dependency. Buildbot can run without it, although StatsService will be of no use in such a case. At present, StatsService can keep track of build properties, build times (start, end, duration) and arbitrary data produced inside Buildbot (more on this later).

Example usage:

captures = [stats.CaptureProperty('Builder1', 'tree-size-KiB'),
            stats.CaptureBuildDuration('Builder2')]
c['services'] = []
c['services'].append(stats.StatsService(
    storage_backends=[
        stats.InfluxStorageService('localhost', 8086, 'root', 'root', 'test', captures)
    ], name="StatsService"))

The services configuration value should be initialized as a list and a StatsService instance should be appended to it as shown in the example above.

Statistics Service

class buildbot.statistics.stats_service.StatsService

This is the main class for statistics services. It is initialized in the master configuration as shown in the example above. It takes two arguments:

storage_backends

A list of storage backends (see Storage Backends). In the example above, stats.InfluxStorageService is an instance of a storage backend. Each storage backend is an instance of subclasses of statsStorageBase.

name

The name of this service.

yieldMetricsValue: This method can be used to send arbitrary data for storage. (See Using StatsService.yieldMetricsValue for more information.)

Capture Classes

class buildbot.statistics.capture.CaptureProperty

Instance of this class declares which properties must be captured and sent to the Storage Backends. It takes the following arguments:

builder_name

The name of builder in which the property is recorded.

property_name

The name of property needed to be recorded as a statistic.

callback=None

(Optional) A custom callback function for this class. This callback function should take in two arguments - build_properties (dict) and property_name (str) and return a string that will be sent for storage in the storage backends.

regex=False

If this is set to True, then the property name can be a regular expression. All properties matching this regular expression will be sent for storage.

class buildbot.statistics.capture.CapturePropertyAllBuilders

Instance of this class declares which properties must be captured on all builders and sent to the Storage Backends. It takes the following arguments:

property_name

The name of property needed to be recorded as a statistic.

callback=None

(Optional) A custom callback function for this class. This callback function should take in two arguments - build_properties (dict) and property_name (str) and return a string that will be sent for storage in the storage backends.

regex=False

If this is set to True, then the property name can be a regular expression. All properties matching this regular expression will be sent for storage.

class buildbot.statistics.capture.CaptureBuildStartTime

Instance of this class declares which builders’ start times are to be captured and sent to Storage Backends. It takes the following arguments:

builder_name

The name of builder whose times are to be recorded.

callback=None

(Optional) A custom callback function for this class. This callback function should take in a Python datetime object and return a string that will be sent for storage in the storage backends.

class buildbot.statistics.capture.CaptureBuildStartTimeAllBuilders

Instance of this class declares start times of all builders to be captured and sent to Storage Backends. It takes the following arguments:

callback=None

(Optional) A custom callback function for this class. This callback function should take in a Python datetime object and return a string that will be sent for storage in the storage backends.

class buildbot.statistics.capture.CaptureBuildEndTime

Exactly like CaptureBuildStartTime except it declares the builders whose end time is to be recorded. The arguments are same as CaptureBuildStartTime.

class buildbot.statistics.capture.CaptureBuildEndTimeAllBuilders

Exactly like CaptureBuildStartTimeAllBuilders except it declares all builders’ end time to be recorded. The arguments are same as CaptureBuildStartTimeAllBuilders.

class buildbot.statistics.capture.CaptureBuildDuration

Instance of this class declares the builders whose build durations are to be recorded. It takes the following arguments:

builder_name

The name of builder whose times are to be recorded.

report_in='seconds'

Can be one of three: 'seconds', 'minutes', or 'hours'. This is the units in which the build time will be reported.

callback=None

(Optional) A custom callback function for this class. This callback function should take in two Python datetime objects - a start_time and an end_time and return a string that will be sent for storage in the storage backends.

class buildbot.statistics.capture.CaptureBuildDurationAllBuilders

Instance of this class declares build durations to be recorded for all builders. It takes the following arguments:

report_in='seconds'

Can be one of three: 'seconds', 'minutes', or 'hours'. This is the units in which the build time will be reported.

callback=None

(Optional) A custom callback function for this class. This callback function should take in two Python datetime objects - a start_time and an end_time and return a string that will be sent for storage in the storage backends.

class buildbot.statistics.capture.CaptureData

Instance of this capture class is for capturing arbitrary data that is not stored as build-data. Needs to be used in combination with yieldMetricsValue (see Using StatsService.yieldMetricsValue). Takes the following arguments:

data_name

The name of data to be captured. Same as in yieldMetricsValue.

builder_name

The name of builder whose times are to be recorded.

callback=None

The callback function for this class. This callback receives the data sent to yieldMetricsValue as post_data (see Using StatsService.yieldMetricsValue). It must return a string that is to be sent to the storage backends for storage.

class buildbot.statistics.capture.CaptureDataAllBuilders

Instance of this capture class for capturing arbitrary data that is not stored as build-data on all builders. Needs to be used in combination with yieldMetricsValue (see Using StatsService.yieldMetricsValue). Takes the following arguments:

data_name

The name of data to be captured. Same as in yieldMetricsValue.

callback=None

The callback function for this class. This callback receives the data sent to yieldMetricsValue as post_data (see Using StatsService.yieldMetricsValue). It must return a string that is to be sent to the storage backends for storage.

Using StatsService.yieldMetricsValue

Advanced users can modify BuildSteps to use StatsService.yieldMetricsValue which will send arbitrary data for storage to the StatsService. It takes the following arguments:

data_name

The name of the data being sent or storage.

post_data

A dictionary of key value pair that is sent for storage. The keys will act as columns in a database and the value is stored under that column.

buildid

The integer build id of the current build. Obtainable in all BuildSteps.

Along with using yieldMetricsValue, the user will also need to use the CaptureData capture class. As an example, we can add the following to a build step:

yieldMetricsValue('test_data_name', {'some_data': 'some_value'}, buildid)

Then, we can add in the master configuration a capture class like this:

captures = [CaptureBuildData('test_data_name', 'Builder1')]

Pass this captures list to a storage backend (as shown in the example at the top of this section) for capturing this data.

Storage Backends

Storage backends are responsible for storing any statistics data sent to them. A storage backend will generally be some sort of a database-server running on a machine. (Note: This machine may be different from the one running BuildMaster)

Currently, only InfluxDB is supported as a storage backend.

class buildbot.statistics.storage_backends.influxdb_client.InfluxStorageService

This class is a Buildbot client to the InfluxDB storage backend. InfluxDB is a distributed, time series database that employs a key-value pair storage system.

It requires the following arguments:

url

The URL where the service is running.

port

The port on which the service is listening.

user

Username of a InfluxDB user.

password

Password for user.

db

The name of database to be used.

captures

A list of objects of Capture Classes. This tells which statistics are to be stored in this storage backend.

name=None

(Optional) The name of this storage backend.

2.5.2.15. secretsProviders

See Secret Management for details on secret concepts.

Example usage:

c['secretsProviders'] = [ .. ]

secretsProviders is a list of secrets storage. See Secret Management to configure a secret storage provider.

2.5.2.16. BuildbotNetUsageData

Since buildbot 0.9.0, buildbot has a simple feature which sends usage analysis info to buildbot.net. This is very important for buildbot developers to understand how the community is using the tools. This allows to better prioritize issues, and understand what plugins are actually being used. This will also be a tool to decide whether to keep support for very old tools. For example buildbot contains support for the venerable CVS, but we have no information whether it actually works beyond the unit tests. We rely on the community to test and report issues with the old features.

With BuildbotNetUsageData, we can know exactly what combination of plugins are working together, how much people are customizing plugins, what versions of the main dependencies people run.

We take your privacy very seriously.

BuildbotNetUsageData will never send information specific to your Code or Intellectual Property. No repository url, shell command values, host names, ip address or custom class names. If it does, then this is a bug, please report.

We still need to track unique number for installation. This is done via doing a sha1 hash of master’s hostname, installation path and fqdn. Using a secure hash means there is no way of knowing hostname, path and fqdn given the hash, but still there is a different hash for each master.

You can see exactly what is sent in the master’s twisted.log. Usage data is sent every time the master is started.

BuildbotNetUsageData can be configured with 4 values:

  • c['buildbotNetUsageData'] = None disables the feature

  • c['buildbotNetUsageData'] = 'basic' sends the basic information to buildbot including:

    • versions of buildbot, python and twisted

    • platform information (CPU, OS, distribution, python flavor (i.e CPython vs PyPy))

    • mq and database type (mysql or sqlite?)

    • www plugins usage

    • Plugins usages: This counts the number of time each class of buildbot is used in your configuration. This counts workers, builders, steps, schedulers, change sources. If the plugin is subclassed, then it will be prefixed with a >

    example of basic report (for the metabuildbot):

    {
    'versions': {
        'Python': '2.7.6',
        'Twisted': '15.5.0',
        'Buildbot': '0.9.0rc2-176-g5fa9dbf'
    },
    'platform': {
        'machine': 'x86_64',
        'python_implementation': 'CPython',
        'version': '#140-Ubuntu SMP Mon Jul',
        'processor':
        'x86_64',
        'distro:': ('Ubuntu', '14.04', 'trusty')
        },
    'db': 'sqlite',
    'mq': 'simple',
    'plugins': {
        'buildbot.schedulers.forcesched.ForceScheduler': 2,
        'buildbot.schedulers.triggerable.Triggerable': 1,
        'buildbot.config.BuilderConfig': 4,
        'buildbot.schedulers.basic.AnyBranchScheduler': 2,
        'buildbot.steps.source.git.Git': 4,
        '>>buildbot.steps.trigger.Trigger': 2,
        '>>>buildbot.worker.base.Worker': 4,
        'buildbot.reporters.irc.IRC': 1},
    'www_plugins': ['buildbot_travis', 'waterfall_view']
    }
    
  • c['buildbotNetUsageData'] = 'full' sends the basic information plus additional information:

    • configuration of each builders: how the steps are arranged together. for example:

    {
        'builders': [
            ['buildbot.steps.source.git.Git',
             '>>>buildbot.process.buildstep.BuildStep'],
            ['buildbot.steps.source.git.Git',
             '>>buildbot.steps.trigger.Trigger'],
            ['buildbot.steps.source.git.Git',
             '>>>buildbot.process.buildstep.BuildStep'],
            ['buildbot.steps.source.git.Git',
             '>>buildbot.steps.trigger.Trigger']
        ]
    }
    
  • c['buildbotNetUsageData'] = myCustomFunction declares a callback to use to specify exactly what to send.

    This custom function takes the generated data from full report in the form of a dictionary, and returns a customized report as a jsonable dictionary. You can use this to filter any information you don’t want to disclose. You can also use a custom http_proxy environment variable in order to not send any data while developing your callback.

2.5.2.17. Users Options

from buildbot.plugins import util
c['user_managers'] = []
c['user_managers'].append(util.CommandlineUserManager(username="user",
                                                      passwd="userpw",
                                                      port=9990))

user_managers contains a list of ways to manually manage User Objects within Buildbot (see User Objects). Currently implemented is a commandline tool buildbot user, described at length in user. In the future, a web client will also be able to manage User Objects and their attributes.

As shown above, to enable the buildbot user tool, you must initialize a CommandlineUserManager instance in your master.cfg. CommandlineUserManager instances require the following arguments:

username

This is the username that will be registered on the PB connection and need to be used when calling buildbot user.

passwd

This is the passwd that will be registered on the PB connection and need to be used when calling buildbot user.

port

The PB connection port must be different than c[‘protocols’][‘pb’][‘port’] and be specified when calling buildbot user

2.5.2.18. Input Validation

import re
c['validation'] = {
    'branch' : re.compile(r'^[\w.+/~-]*$'),
    'revision' : re.compile(r'^[ \w\.\-\/]*$'),
    'property_name' : re.compile(r'^[\w\.\-\/\~:]*$'),
    'property_value' : re.compile(r'^[\w\.\-\/\~:]*$'),
}

This option configures the validation applied to user inputs of various types. This validation is important since these values are often included in command-line arguments executed on workers. Allowing arbitrary input from untrusted users may raise security concerns.

The keys describe the type of input validated; the values are compiled regular expressions against which the input will be matched. The defaults for each type of input are those given in the example, above.

2.5.2.20. Codebase Generator

all_repositories = {
    r'https://hg/hg/mailsuite/mailclient': 'mailexe',
    r'https://hg/hg/mailsuite/mapilib': 'mapilib',
    r'https://hg/hg/mailsuite/imaplib': 'imaplib',
    r'https://github.com/mailinc/mailsuite/mailclient': 'mailexe',
    r'https://github.com/mailinc/mailsuite/mapilib': 'mapilib',
    r'https://github.com/mailinc/mailsuite/imaplib': 'imaplib',
}

def codebaseGenerator(chdict):
    return all_repositories[chdict['repository']]

c['codebaseGenerator'] = codebaseGenerator

For any incoming change, the codebase is set to ‘’. This codebase value is sufficient if all changes come from the same repository (or clones). If changes come from different repositories, extra processing will be needed to determine the codebase for the incoming change. This codebase will then be a logical name for the combination of repository and or branch etc.

The codebaseGenerator accepts a change dictionary as produced by the buildbot.db.changes.ChangesConnectorComponent, with a changeid equal to None.